WEG 5kW Hybrid Inverter (Single-Phase)

WEG 5kW Hybrid Inverter (Single-Phase)

PLEASE NOTE: Only WEG High Voltage Batteries are Compatible

This is an All-weather Inverter, it can be installed indoor or outdoor

Efficient: low operating and starting voltage, up to 150% DC input oversizing, and 10% AC output overload; Secure: AFCI (Arc-fault circuit interrupter) system, prevention of DC short circuits; Reliable: weatherproof installation (IP65) with natural convection (more efficient) and integrated surge protection for both DC and AC.

Here is a video about the WEG Solar Range

Specifications

• Max. Input Power [W] 7500
• Max. Input Voltage [V] 600
• Start-up Input Voltage [V] 75
• Rated Input Voltage [V] 360
• MPPT Operating Voltage Range [V] 80 ~ 550
• Max. Input Current [A] 16 / 16
• Max. Short-circuit Current [A] 20 / 20
• No. of Independent MPP Trackers 2

BATTERY CONNECTION

• Battery Type Lithium battery (LFP)
• Battery Voltage [V] 80 ~ 480
• Max. Charge/Discharge Current [A] 40
• Communication Interface CAN(communicate with inverter, upgrade BMS

• Max. AC Input Power [VA] 10000
• Max. AC Input Current (per phase) [A] 45.5
• Rated Output Power [W] 5000
• Max. Output Apparent Power [VA] 5500
• Rated Output Current (per phase) [A] 22.7
• Rated Output Current (per phase) [A](For AUS) 21.7
• Max. Output Current [A] 25.0
• Rated Grid Voltage [V] 220/230/240
• Rated Grid Frequency [Hz] 50/60
• Power Factor 1 ( Adjustable from 0.8 leading to 0.8 lagging )
• THDi [%] <3 @rated power

PROTECTION

• Insulation Monitoring YES
• Residual Current Monitoring YES
• DC Reverse Polarity Protection YES
• Anti-islanding Protection YES
• AC Short-circuit Protection YES
• AC Overcurrent/Overvoltage Protection YES
• DC Switch YES
• Battery Wack-up Function YES
• SPD DC: Type II / AC: Type III

Product specifications: Click Here

Installation guide: Click Here